Mô tả
Máy bơm KSB Etanorm R được thiết kế ngang, dài cùng một tầng bơm xoắn ốc vỏ (kích thước máy bơm 125-500 với hai giai đoạn) ở phía sau thiết kế kéo ra, với tay áo trục thay thế / trục tay áo bảo vệ và vòng đeo vỏ. Thiết kế để ATEX
Thông số kỹ thuật máy bơm KSB Etanorm R
Type of impeller | Radial; Multi-vane impeller;Closed;Closed / Radial |
Type of installation | Long- coupled |
Impeller material (EN standard) | JL 1040; 1.4408;GJL-250;G-CUSN10 |
Type of bearing | Ball bearings |
Drive frequency | 50 Hz / 60 Hz |
Maximum speed of rotation | 1. 750 1/min |
Maximum flow rate | 2. 280 m³/h |
Maximum discharge-side pressure | 16 bar |
Casing material (EN standard) | JL 1040; JS 1025 |
No. of impeller entries | Single entry |
Casing material | Nodular cast iron; Cast iron |
Minimum flow rate | 50 m³/h |
Suction characteristics | Non- priming |
Drive voltage | Low voltage |
eClass assignment | 36410000; 36410100;36410101 |
Pull-out design | Yes |
Pump set location | Dry installed |
Max. permissible fluid temperature | 140 002 |
Main applications | Water; Building services;Energy;Waste water / sewage;Industry and process engineering |
Type of installation | Stationary |
Type of casing | Volute casing |
Type of connection | Flange |
Type of lubrication | Grease / Oil lubrication |
Type of drive | Electric motor, turbine |
Installation position | Horizontal |
Shaft material (EN standard) | C45; 1.4057 |
Type of coupling | Direct |
Shaft seal type | Gland packing; Mechanical seal |
H (max) | 90, 00 m |
Maximum rated pressure (discharge) | PN 16 |
H (min) | 2, 50 m |
Nozzle position | End suction |
Casing partition | Radially split |
Ứng dụng của máy bơm KSB Etanorm R
Phun tưới tiêu, thủy lợi, cấp thoát nước, cấp nước nóng, hệ thống cấp nước, hệ thống sưởi ấm và điều hòa không khí, vận chuyển condensate, hồ bơi, hệ thống phòng cháy chữa cháy, xử lý nước nóng, nước làm mát, nước chữa cháy, dầu, nước muối, uống nước, nước lợ, …